Sizing Guide

let’s find your perfect fit!

Our tees are Comfort Colors garment-dyed heavyweight cotton, and our crewnecks are Port & Company core fleece. Both are unisex and both run roomy, so take a peek at the fit photos and measurements below before you pick a size.

Model wearing sizes S, M, L and XL Comfort Colors t-shirts for fit comparison

Our #1 sizing tip

Comfort Colors run big to begin with. For the oversized, streetwear look you see in our photos, go two sizes up from your normal shirt size. Want it to fit like a regular tee? Order your usual size.

How do you want it to fit?

Pick the vibe, then adjust from your normal shirt size.

True to size

Order your normal size

Classic tee fit with a little room. Skims the body, hits at the hip.

Relaxed

Size up once

Comfy and loose without swimming in it. Great for layering over scrubs.

Oversized  ·  our favorite

Size up twice

Dropped shoulders, long body, tuck-it-or-don’t. The look in our photos.

Measurement charts

Chest width and body length are the garment laid flat; the last column is that chest doubled, so you can hold it up against your own measuring tape. All in inches, give or take about half an inch — these are hand-dyed, so each one has a little personality.

Swipe the chart sideways to see every column →

Comfort Colors 1717 — heavyweight garment-dyed tee
SizeChest widthBody lengthChest, all the way around
S18¼″26⅝″36½″
M20¼″28″40½″
L22″29⅜″44″
XL24″30¾″48″
2X26″31⅝″52″
3X27¾″32½″55½″
4X29¾″33½″59½″
Port & Company PC78 — core fleece crewneck
SizeChest widthBody lengthChest, all the way around
S20″28″40″
M22″29″44″
L24″30″48″
XL26″31″52″
2X28″32″56″
3X30″33″60″
4X32″34″64″

Heads up: our crewnecks run a full size bigger than our tees. A crewneck L measures the same across the chest as a tee XL. So if you size up twice in a tee, size up just once here for the same oversized look.

How to measure (the easy way)

Grab a shirt you already love wearing, lay it flat, and compare it to the chart above. No tape around your body required.

1

Lay it flat

Smooth a favorite shirt out on a table or bed, front side up, sleeves out to the sides.

2

Measure the chest

Go straight across, armpit to armpit, about an inch below the sleeve seam. That’s your chest width.

3

Measure the length

From the highest point of the shoulder straight down to the bottom hem.

A few good-to-knows

Unisex sizing. These are cut straight, not tapered, so there’s no separate men’s or women’s size run.
Wash cold, hang dry. The garment-dyed cotton tees can lose up to half an inch in length in a hot wash. The fleece crewnecks are far more forgiving, but cold and gentle keeps the print happy on both.
Between two sizes? Size up. Nobody has ever been mad at a slightly roomier tee after a twelve-hour shift.
Tee colors vary a touch. Garment dyeing means no two tees come out identical — that’s the charm, not a defect. Crewneck colors are consistent batch to batch.

Still not sure? Let’s figure it out

Three taps and I’ll tell you exactly what to order.

1 What size shirt do you normally wear?

2 How do you want it to fit?

3 What are you buying?

Pick all three above and your size shows up here.

Rather just ask a human? Send me a message — I answer every one myself.